Have you ever install the auto led bulbs by yourself? If your answer is yes, then you are lucky and you will save some money for installing car led bulbs. Here you will some knowledge about how to install the auto led bulbs to you car.
At first, you should get two different screwdrivers and a bit of electrical tape. In fact, it is rather easy to install car led bulbs to the inside of the car. As a rule of thumb, the car, battery should be disconnected for your safety and so the car does not short-circuit anything if you accidentally tap a wire. It is easy to complete your new ride? and you won't have the necessary to worry about the electrical problems or hurting your car in any way. You will also be connecting the wiring from the bulbs into your battery, so you have better keep the hood open to allow easy access.
Find out the place where you want to install the bulbs, if you are a driver who have aesthetic consciousness, you will have the chance to do some things to make your car beautiful. You can choose some interior bulbs and decoration bulbs to be a great complement to your car.
Buy a long enough wire to the dashboard, and look for other wires running through the firewall. There are mounting locations on the corners of the bulbs where you will drill the screws through into the kicker panel. Once you have this configured, plug the power wire running from the battery into the top part of the switch that came with the bulbs.
Obviously, there is no doubt that it is not a easy work to install the auto led bulbs by yourself. Of course, if you try twice or more times, you will get more fun in the process of the installing bulbs.
Source:
