A unique powder coating gun with patented NEW Dipstick delivers color changes in 15 seconds specially designed for multi-color operations.
The Dipstick is a powerful vibrating pump. Just insert the one piece Dipstick into any powder box and spray. It uses a self - cleaning powder pump because of which powder is completely flushed away with the press of a button without leaving behind any traces of previous color. This helps in maintaining easy & fast color change efficiently.
It features an integrated 100KV built-in electrostatic high voltage generator for enhanced transfer efficiency and reduced wastage. A most easily maneuverable, well balanced and efficient powder gun constructed from wear-resistant material, specially rounded to prevent impact fusion and thus provide a smooth uninterrupted flow.
The gun has a patented replaceable power cartridge. (Mitsuba US Patent No. 5678770). In the unlikely event of a malfunction all you need is to replace a Power Cartridge with the following three steps:
Pull the barrel, Replace power cartridge, Tighten the nut & you are ready to go
Color change is as simple as 1, 2, 3...
1. Remove Dipstick from the box.
2. Clean previous color by blowing air on the Dipstick.
3. Insert into another box & spray.
As the Dipstick has a Vibratory Submersible Pump it is not required to vibrate the entire powder box. The air required to vibrate the cradle is much higher as compared to the air required to vibrate the Dipstick's Pump. This results in lower air consumption in your plant.The Dipstick Model has the Advantage of the Smart Tracker Performance Monitor.
Advantages of using Dipstick:
No need to replace the colour box
Patented Infiniti technology (US Patent No. 5678770) protects your gun against any failure. NO BREAKDOWN! NO EXPENSIVE REPAIRS!
Self Vibrating Submersible Pump
Reduce air consumption
No Powder Spillage. No Powder Wastage.
Approved as per the new European ATEX regulations.
Its unique integrated cascade incorporates a corona Classic attachment which eliminates powder wastage, penetrates the Faraday Cage area and reduces powder coating cost by increasing transfer efficiency.
Mitsuba's Multistatic 700 powder spray equipment incorporates a "Smart Tracker" - a self-diagnosing performance monitor which indicates how efficiently individual components are working. "Smart Tracker" makes the operator smart enough to self trouble shoot at the site itself and rectify the problem instantly, without external dependency and thus maintain the highest operating efficiency in the powder coating process.
The standard Multistatic 700 consists of both corona & tribo guns, electro pneumatic control panel with smart tracker, 25 kg stainless steel hopper and trolley.
The system is user friendly, most reliable and very convenient to use. The equipment is CE & ATEX is certified.
