IDG News Service - Researchers at the University of South Carolina have discovered that some types of electricity meter are broadcasting unencrypted information that, with the right software, would enable eavesdroppers to determine whether you're at home.
The meters, called AMR (automatic meter reading) in the utility industry, are a first-generation smart meter technology and they are installed in one third of American homes and businesses. They are intended to make it easy for utilities to collect meter readings. Instead of requiring access to your home, workers need simply drive or walk by a house with a handheld terminal and the current meter reading can be received.
While many gas and water AMR meters continuously listen for a query signal from a meter reading terminal and only transmit a reading when requested, the researchers found at least one type of electricity meter works on the opposite principle. It continuously sends a meter reading every 30 seconds around the clock.
"We had heard a lot about smart meters, about how great and how efficient they were," said Wenyuan Xu, an assistant professor at the University of South Carolina, speaking to IDG News Service. "We thought about privacy and wondered how secure are they meters currently in use."
It turns out, not very.
The tools were simple: a $1,000 Universal Software Radio Peripheral software-defined radio, an amplifier, and the freeware GNU Radio software, plus of course, the team's knowledge of wireless protocols and data processing.
The first job was capturing the data. The team found that the meters transmit every 30 seconds by hopping through a number of frequencies, but the cycle of frequencies chosen isn't random so the pattern can be predicted.
Then, with just a few days work, Xu and her team were able to deconstruct the proprietary protocol used by the meters thanks to documentation they found on the Internet and information freely disclosed by meter makers.
"Once we got the raw signal, we processed it, and reverse engineered it," she said.
Using an off-the-shelf antenna and amplifier, the researchers were able to capture packets from electricity meters at a distance of up to 300 meters. In the neighborhood where they tested, they were able to receive packets from 106 electric meters.
The data sent was in plain text and carried the identification number of the meter and its reading. The name of the home owner or the address aren't included, but anyone motivated enough could quickly figure out the source.
"The meter ID was printed on the front of the meter we looked at, so theoretically you could read the ID [off a target meter] and try to sniff packets," Xu said.
In her tests, Xu found she was able to pull packets out of the air from target meters between once every 2 to 10 minutes. That's fast enough to be able to work out the average power consumption of a house and notice start to deduce when someone is at home.
"Smart meters should be encrypted," said Xu.
The good news is a new generation of meters based on a more advanced technology, called AMI (advanced metering infrastructure), are supposed to employ encryption. Guidelines from the National Institute of Standards and Technology's Smart Grid Interoperability Panel made such a recommendation in a 2010 report.
"Should designers and manufacturers of smart meters or secondary devices decide to incorporate wireless technology for the purpose of communicating energy usage information, then that data must be securely transmitted and have privacy protection," the report said.
But that's too late for the AMR meters already installed across the U.S.
There are 46 million AMR meters in use in 2011, according to a U.S. Department of Energy report. That represents about one in three houses and businesses. While they are likely to be replaced with AMI meters, the slow upgrade cycle of utility companies could mean they remain in use for years to come.
It's unclear if all AMR meters behave the same way. Xu didn't want to reveal the maker of the meter her team targeted in case it spurs others to try the same thing.
There's also no evidence to suggest that burglars have ever used AMR meters as a way of predicting when a home owner will be present or away, but the research does highlight the potential nefarious uses of electricity consumption data and the need to ensure next-generation platforms are more secure.
