The all-new user-friendly Multistatic 700 powder coating equipment helps you achieve highest productivity at the best powder coating quality. It features an integrated 100KV built-in electrostatic high voltage generator for enhanced transfer efficiency and reduced wastage. A most easily maneuverable, well balanced and efficient powder gun constructed from wear-resistant material, specially rounded to prevent impact fusion and thus provide a smooth uninterrupted flow.
Infiniti Corona Gun guarantees 100 KV at Gun Tip for the entire life of the gun, thus maintaining the continuity of best result throughout its life. The use of Multistatic Series has stepped up the powder coating speed by 20% as compared with others. The entire range of nozzles provided with the system assures prefect powder coating even in deep or remote areas which are difficult to coat. This maintains the highest transfer efficiency. Patented Infiniti? technology (US Patent No. 5678770) protects your powder coating gun against any failure. There is no breakdown & no expensive repairs. All you need is to replace the barrel in the event of power failure. Complete control in your hands with Smart Tracker diagnosis system. This locates any problem instantly and the problem can be rectified by you. This minimizes the downtime and external dependency. The system is approved as per the new European ATEX regulations.
Sampling cup is available in size range of 50gms, 100gms, and 500gms that can be effectively used with Mitsuba's Infiniti Corona Gun. Our range of sampling cups available in different sizes is sufficient enough to be used for powder testing & laboratory purpose. Small or large quantities of powder can be sampled very easily. When very less quantity of powder is to be sprayed over the object, sampling cups are used. These are also easily used for color change & trial purpose.
Scope of Supply:
1. A corona powder spray gun with an integrated 100KV electrostatic high voltage generator and patented replaceable power cartridge.
2. Dual electro-pneumatic control panel with a trendsetting new Smart Tracker. Corona & Tribo gun can be operated from the same panel.
3. Stainless steel powder hopper 25 Kgs; Powder pump output 0-30 kgs/hr; Trolley
4. All accessories for startup
Pneumatic Data:
Optimum Input Pressure: 6 bar
Max water vapour required: 1.3 g/m?
Max oil vapour required: 0.1 ppm
Maximum air consumption: 13.2 m3/hr.
Electrical Data:
Single phase AC: 220V or 230V / 110V
Safety class: IP 54ppm
Temp Range: +2?C to 50?C
Input Voltage: 10V eff
Output Voltage: 100KV DC
Output Current: 100?A
