Numerous industries in Australia and other countries prefer water jet cutting over other types of precision cutting. They use it in many applications, from heavy duty cutting in power plants to tools used for space exploration. If you want to know what it can do for your business, read on.
Water Jet Cutting: The Fundamentals
If you are planning to utilize this type of cutting for your company, you need to know precisely how this works. This uses a powerful jet of power that cuts cleanly and precisely through material in a single go. It's so powerful that the material does not shred or cut.
In the formation of the jet stream, a jet edge powered intensifier pump pressurizes the water as much as 60,000 psi. The pressurized water goes through an attenuator. This tool is responsible for stabilizing the jet stream. The water jet cutting motion comes about due to the ultra-high pressure water forced through a pre mounted sapphire hole as small as.003". The pressurized water exits the opening at an intense velocity as a coherent stream produces a clean cut with minimum kerf. A kerf is a slit or a notch made by a saw or even a cutting torch.
The producers design the compact and lightweight cutting head for reliability in high cycle and on and off applications. When you work with this with a suitable motion control system, this sort of precision cutting can cause extremely exact cuts with a high degree of repeatability over a range of shapes and also materials.
Your firm can gain from cutting with water. It can increase production rates on paper products, woven or non-woven textiles and similar materials without shredding or destroying the material. This is a lot better than traditional processing methods. The water jet stream cuts flexible materials rapidly and exactly. It can overcome any kind of distortion encountered from compression during traditional die cutting.
It can be utilized in lots of materials. Here are several of them:
-Plastics
-Meals
-Corrugated cardboard
-Paper
-Non-Woven
-Rubber
-Insulation
-Automotive Flooring and Headliners
There are lots of good things about using this technology. When compared with standard cutting methods, precision water jet cutting technology is more affordable and yields cleaner outcome. This brand new technology can often eliminate further machining processes. Here are several advantages of using this method.
-This technique is cheaper than other procedures. This is one main reason industries prefer this. As errors are little, they save costs on getting new materials.
-This technique can cut through any kind of material.
-This kind of precision cutting can cut a variety of thickness. This makes it effective for heavy industries to utilize.
-This technique doesn't need heat. This is cold cutting technique is not affected by heat zones.
-It can cut through any kind of shape.
-This type of cutting leaves a satin smooth finish. This then, lessens secondary operations.
-The narrow kerf eliminates only a small amount of material.
-Machine composite materials, or materials with unlike materials, are fixed together well.
To know more this, have a look at internet sites such as atasteel.
