Trade Resources Industry Knowledge The Different Ways to Clean a Jetted Tub Were Introduced

The Different Ways to Clean a Jetted Tub Were Introduced

Tags: Jetted Tub

At the end of the day, nothing can be more relaxing than plunging your stressed out body into the warm water of a jetted tub. The massaging effect that it creates releases the tension from the muscles and provides relief from the aches and pains. Regular cleaning of the tub is a must as its damp surface can be an ideal breeding ground for mold, mildew, microbes, etc. These tubs are mostly made of fiberglass or acrylic. Therefore, you cannot use any harsh cleaning products on them.

How to Clean a Jetted Tub with Soap?

Fill up the tub with some hot water whose temperature is almost 140°F. The level of the water should be such that it covers all jets of the tub in order to ensure that the jets operate effectively. Now, add 4 tablespoons of dishwasher detergent with low suds into this water for cleaning the tub. Any regular foaming detergent is not suitable because the whirling action of the tub can create soapy bubbles all over the bathroom and you will have a tough time getting rid of them. After adding the dishwasher detergent, you can switch on the jets and let it run for 10-15 minutes. Stop the jets and drain out the soapy solution out of the tub. Then again fill up the tub with water, but this time, use cold water. Run the jets all over again for 15 minutes more and let it drain out. This is done to wash off the soapy residues from the tub. Let it air dry before you use it.

How to Clean a Jetted Tub with Bleach?

If you have not cleaned the bathtub for a long time, then you will find tough stains on its surface. There are chances of mold and mildew build up. Even the jets get clogged with various debris. In such cases, you have to use some strong cleaning agent and bleach can provide you with the right solution for this problem. To begin with, you have to fill up the tub with water, but in this method, you need more water as you have to dilute the bleach. However, water should not reach up to the brim of the tub as the whirling action can splash the bleaching solution all around and stain other surfaces of the bathroom. Pour one cup of household bleach into the warm water and run the jets for at least 10 minutes. After that, stop the jets and drain out the bleach solution out of the bathtub. To rinse off the standing bleach that remains on the tub surface, use a hose. For a final rinse, refill the bathtub once again with warm water and put on the jets for some time and then, as usual, let it flow out of the tub.

How to Clean a Jetted Tub with Vinegar?

Many people are not too keen to use bleach for cleaning jet tubs as they fear that its strong chemical residues can cause harm to their skin later on. If you feel the same, then vinegar is a safe option available with you. The acidic property of vinegar works really well for the removal of dirt, mold and grime that get stuck on the bathtub. You need not worry about the vinegar smell as it will vanish on its own after few hours. First of all, you have to fill up the tub with warm water that covers the jets by say three inches. Add 5 cups of white, distilled vinegar, but not more than that. Otherwise, it will leave behind a strong vinegar smell. Next, run the jets for 15-20 minutes. Let the vinegar solution stand on the tub for 15 minutes more so that it can dissolve out the dirt and debris properly. After that, the water should be drained out. You may find that there are some areas in the tub where some stubborn dirt and grime still remain. To scrub them out, take some vinegar in a spray bottle and sprinkle it on the dirty spots. Then rub the area with a damp sponge or soft piece of cloth and the stains will be gone. Do not use any abrasive scrub pad for this job as it can leave behind ugly scratches.

A thorough cleaning of the jetted tub is a must once in a month with any of the methods discussed in this article. Besides, after every use, you should flush out the residues of soap scum, body oils and dead skin cells from the tub. Fill up the tub with warm water and run its jets for around 10-15 minutes and drain out the tub. This practice helps a lot in jetted bathtub maintenance and thus, you can avoid any big hassle while carrying out a thorough cleaning of the bathtub.

Source: http://www.buzzle.com/articles/how-to-clean-a-jetted-tub.html
Contribute Copyright Policy
How to Clean a Jetted Tub
Topics: Construction