Gone are the days when garage doors needed to be opened manually. This was quite an effort when garage doors needed to be pulled up or opened wide. Nowadays, electronically operated garage door openers have come into existence. These are very handy as they can be operated with the help of a remote control or by punching a code in the given keypad fixed on the wall. These garage door openers are also secure as they cannot be opened by anyone else and your things will be safe. The approximate installation cost for a garage door opener can range between USD 150 to USD 450. You can go into any hardware store or visit an online store for garage door openers comparison of prices before you install the garage door opener. Let us now take a look at the methods for installing the garage door opener.
Installing a Garage Door Opener
Garage door opener installation is not exactly a Herculean task, as many of us may feel. You can do it yourself with a few basic carpentry skills. Given below are some simple instructions on how to install a garage door opener.
Before we get to the task of installing a garage door opener, make sure you have all the required items at hand to save you the time of running about to get the things. Remove the garage door off its hinges before your install the garage door opener. You will need a garage door opener, hammer, screwdriver, power drill, wrenches and reinforcing steel etc.
Now that you have organized all the things together, let us now get down to the task fixing the garage door opener. Take care that all the parts are assembled properly for the proper functioning of the garage door.
Along with the garage door opener parts, you would have also got an instruction manual directing you the steps regarding the placement of a garage door opener. Read through it and follow them. Assemble all the pieces of the rail together as per the instructions in the manual. Once you are done connect the garage opener along with the pulley assembly to the rail.
Fasten the header bracket to the garage door firmly and connect it to a power supply unit. Insert the assembled rail to the power unit as well. Secure the idler pulley with the help of bolts.
Now for the traveler to slide without trouble, attach the chain and wrap it around the pulley. Secure both the ends of the chain with a retaining clip that has been provided with the other paraphernalia.
After marking the center point on the garage door, the mounting board should be installed. After mounting the header, attach the idler pulley assembly. The wires from the door opener should be connected to the main power supply. Before you begin this task, make sure that the main power supply has been turned off.
The power supply can be connected to the main power unit and the sensors for the door can be installed. Next connect all the parts together and fix the garage door back to its hinges. Once you have completed the task, restore the power supply and check if everything is working properly. You must also be aware of troubleshooting garage door opener problems in case you face some issue regarding the garage door opener. Hope you found this precise overview on how to install a garage door opener informative and useful.
