Beginning December 1st 2010, the applicable standards version for CQC mark voluntary certification of lamp controlgear will be replaced by new version standards, the list of contrast of the standards as follows,
Old version standards:
GB 19510.1-2004 Lamp controlgear-General and safety requirements,
GB 19510.2-2005 Particular requirements for starting devices (other than glow starters)
New version standards:
GB19510.1-2009, GB19510.2-2009
Those new standards had been issued and GB19510.1-2009, GB19510.2-2009 will be taken into effect on December 1st 2010. Some related requirements for this standards change as follow:
1. For certificate holders who hold old version certificates should submit change application on the CQC website before the follow-up factory inspection after December 1st 2010. Once your change applications are receipted, in addition to the necessary documents, you should submit all the photos of the types in your certificate and test reports to us, and we will check the all documents on meeting the new implementation rules of starting devices. If it meets the requirements of the rules, the new version standards certificate will be issued. Changing the old certificates should be completed by December 1st 2011. If the certificate were not transferred on time, they would be suspended, if they failed to be replaced, they will be withdrawn by December 1st , 2012.
2.From December 1st 2010 to November 30 2011, each CQC's branches in local have duty to notify the factory that applicable standard versions of lamp controlgear have changed on the time of their follow-up factory inspection. If certificate holders still do not submit the change application, the non-conformity will be issued by inspectors to factory. Factory can correct this non-conformity by submitting standard version change application in ten working days.
3.After June 30th 2012, CQC will not receive standard version change application.
