Nest-based manufacturing is the discipline of producing the most useable material out of any amount of flat raw material. For example, an industrial panel saw that can create 200 units out of a certain amount of stock would be better than a saw that created 195 pieces out of the same amount of material. Nest-based manufacturing is not new, but it does require the uninitiated to investigate the best type of equipment to use and how it should be configured before it becomes incorporated onto the production line.
Choosing the Right Cutting Tool
Those who plan to practice nested-based manufacturing with the help of a panel saw should answer three questions before they begin searching for panel saws for sale:
Would a CNC router work better than a saw? Would a horizontal model or a vertical model work best? Would a CNC model or a manual model work best?
Concerning the first question, some users find a CNC router is better for panel production than a saw. A router with a big table can cut sizable swaths of raw material into smaller pieces, and leave the minimum amount of material behind. An industrial panel saw is capable of performing the same task, but it would not do it as quickly, especially if the stock was not precut to the correct length or width for the panels. Furthermore, the saw could not do certain tasks such as create cutouts in cabinet doors, or create a beveled edge. If such work is needed, then a CNC router becomes a better choice than a saw.
If you are fabricating basic panels, a saw should work fine, and it will probably be less expensive than a CNC router. As you look for panel saws for sale, though, you will need to choose between a vertical model and a horizontal model. Many users prefer the latter because it simplifies the loading process. It also takes up less space in the shop, and never requires you to move the stock to cut it. If you choose a saw instead of a CNC router, opting for a vertical model is a good choice.
If you decided not to invest in a CNC router, should you consider purchasing a CNC saw? It depends on your production demand. If demand is increasing, and you could perform other work while the saw’s computer-controlled blade cut the stock on its own, then choosing a CNC model would add needed efficiency to the production line. If your production demand is relatively low, on the other hand, purchasing a CNC model might not be worth the expense.
Call RT Machine Today
If you are looking for panel saws for sale, RT Machine is the place to shop. For over ten years, we have supplied woodworking professionals with the equipment they need to meet production demand and diversify their work. Whether you need an industrial panel saw or a CNC router, we will supply you with the best equipment. To learn more about our products and services, browse through our website, or call us today.
