A Drill Bit Serves Different Purposes

For constructing a house or any kind of construction work, a drill bit serves different purposes. A drill bit is used for drilling into cement structure or any kind of hard material on which other hand tools will not work. Drill bit is a kind of hand masonry tool. Picking the right masonry drill bit is important before you start the drilling job. You need to choose the right drill bit depending on the surface you will be working on. Always remember, an electric one with cord is much powerful than the cordless. Here are few tips to select the right masonry bit and also learn the steps to use. The size of the hole to be made defines the size of the masonry bit to be used but also needs to consider the type of material of the surface. It is advisable to check the information manual of the drill bit you intend to purchase. For any doubts, approach for help from the hardware store associates. The first thing to do after opening the packet is, loosen the chuck over drill and adjust the drill bit. Once you are through this, insert the blunt side of the bit into the chuck. Now, fasten the chuck with the key provided or by twisting the two parts in opposite direction against each other. The place to be drilled needs to be marked and place the masonry bit against the mark to start drilling. Hold the drill tight with both hands, now i's time to pull the trigger and start your job with light pressure. Increase the pressure or the speed if required. You may also work the masonry bit in and out to remove the extra loose materials. Source: indiamart.com