Rubicon Technology Inc of Bensenville, IL, USA (which makes monocrystalline sapphire substrates and products for the LED, semiconductor and optical industries) has announced plans to cease all production activities at its plant in Penang, ...
Tags: Rubicon, Malaysia plant, PSS
For second-quarter 2016, Rubicon Technology Inc of Bensenville, IL, USA (which makes monocrystalline sapphire substrates and products for the LED, semiconductor and optical industries) has reported revenue of $3.5m, down on $4.3m last ...
For fourth-quarter 2015, Rubicon Technology Inc of Bensenville, IL, USA (which makes monocrystalline sapphire substrates and products for the LED, semiconductor and optical industries) has reported revenue of $2.45m, more than halving from ...
Tags: Rubicon, Sapphire substrates
The LED industry is gradually maturing in 2015, with products cost/performance (C/P) ratio becoming increasingly important. Low and mid-power flip chip products are increasingly valued by the industry. To further understand this trend ...
Tags: LED industry, LED chip, Chip Scale Packaging
Fukuda Crystal Laboratory Co Ltd has grown ScAlMgO4 scandium aluminium magnesium oxide (SCAM) crystal with a diameter of 50mm (2 inches) that could be used as a substrate for gallium nitride (GaN)-based light-emitting devices such as blue ...
Tags: Fukuda Crystal Lab, a diameter, Electrical
Taiwan's National Tsing Hua University has claimed the highest optical 3dB modulation bandwidth of ~463MHz at 50mA for a 500nm-wavelength blue-green indium gallium nitride (InGaN) LED [Chien-Lan Liao et al, IEEE Electron Device Letters, ...
Tags: blue-green LEDs, taiwan, LED, LED light, Electrical, Electronics
According to Yole Développement's new market research report 'LED Front-End Manufacturing Trends' (which covers substrates, epitaxy, lithography, plasma etching & deposition, PVD and testing), the LED substrate is one of the key ...
Tags: LED, Electrical, Electronics
The overall Front-End manufacturing trends for LED manufacturing are following the same path: decrease manufacturing costs, increase yield to improve binning, extract more light per mm² and per watt injected into the die… So all ...
Researchers based in Korea and Egypt have used wafer thinning to increase the efficiency of nitride semiconductor green light-emitting diodes (LEDs) [Wael Z. Tawfik et al, Appl. Phys. Express, vol6, p122103, 2013]. The contributing ...
Emcore Corp of Albuquerque, NM, USA, which makes compound semiconductor-based components and subsystems for the fiber-optic and solar power markets, says that Dr Thomas Russell has decided to not stand for re-election to the board at the ...
Tags: Emcore, electronics
Module packaging service and LED substrate vendor Tong Hsing Electronic Industries expects its sales to drop slightly in the fourth quarter of 2013 as compared to the previous quarter in which revenues hit a record high of NT$2.24 billion ...
Tags: Module packaging, LED substrate
Azzurro has announced both production and lab milestones in wavelength variation using its GaN-on-Si LED template wafers and Air Water is working on a GaN-on-SiC-on-Si architecture with a new Aixtron MOCVD reactor. While the LED industry ...
Tags: LED Substrate Strategies, Lighting
Tong Hsing Electronic Industries expects its sales in the third quarter of 2013 to grow at the same pace or higher than the 8% it posted in the previous quarter, powered by ever growing demand for LED substrates and CMOS image sensors, ...
Tags: Tong Hsing Electronic
Mass production of GaN template wafers based on sapphire substrates could free LED manufacturers' MOCVD reactors for more LED production and lower component cost helping drive the deployment of SSL. Hitachi Cable has become the second ...
Tags: Hitachi Cable, GaN-Template LED, Lighting
Is it time for high-brightness LED manufacturing to get serious about process control? If so, what lessons can be learned from traditional, silicon-based integrated circuit manufacturing? The answer to the first question can be ...
Tags: LED manufacturing, LED substrate, MOCVD