Norway-Manchester based lighting and visuals specialist dbn has specified and installed a custom LED lighting and control solution for the new set of the Norwegian National Lottery which is operated by Norsk Tipping AS.
dbn's project manager was Nigel Walker,and they were working for UK based Stage One Creative Services,with whom Walker has enjoyed a long and successful working relationship.Stage One in turn was commissioned by producers Fabelactiv,to deliver a set for the high profile show which is broadcast from their HD studios in Hamer via national TV channel,NRK.
Stage One appointed Nick King to design the spectacular set,and then asked dbn to interpret the prominent lighting elements of the resulting 15m wide scenic environment,a streamlined fusion of interlocking curves made from frosted acrylic material and backlit with LEDs,embracing retro and futuristic in the same breath.
The relatively short lead time was a major challenge for dbn,who energised their suppliers-including Artistic Licence,Anytronics and Studio Due-all of whom rose to the occasion to deliver the orders quickly and efficiently.
The aim was to realise the ideas suggested in Nick King's designs with a solution that was very flexible,with a long lifetime,and requiring minimal maintenance.The largely LED route also offered an energy efficient lighting scheme.
dbn chose Kypai's ColourScene RGBA LED battens,supplied by Studio Due,to illuminate the five cyclorama panels and the four revolving acrylic monoliths that sit between them.Over 50 of these in 1200 mm and 600 lengths are ensconced behind groundrows and inside the monoliths.
Kypai also supplied 100 x 3 watt RGB LED SMD Tri-linkers used for internal lighting of acrylic features in the set.All of this equipment is controlled by three or four channel DMX LED drivers.
Additionally there is over 500m of RGB LED Flexi-Strip(encapsulated ribbon)from Artistic Licence.This is used in radials under the circular centre section of floor,concealed behind stair treads and other features to produce striking delineating streaks of light.There is also a length behind each clear acrylic vane on the revolving monoliths(64 x 3m tall vanes in total).
This is controlled via Artistic Licence Rail-Pipe HC low voltage dimmers housed in two custom control racks either side of the set.
Underneath other areas of the floor,dbn spec'd 27 Anytronics Anycolour four-channel RGBY colour changing fluorescent batten fittings which up-light through the opaque floor tops and look smooth,even and vibrant on the overhead camera shots.These units utilise high efficiency recyclable fluorescent lightsources(energy group A)with digitally controlled high frequency ballasts for a long lifetime.
Anylight Dali-DMX units control the digital ballasts and are housed in the off stage control racks.
Mounted in the stage floor are 37 in-ground white LED up-lighters,accentuating the curvature of the set,which are controlled by a CC DMX LED driver unit.
Dotted around the upper level of the stage are six Pulsar ChromaSpheres,plus six bespoke acrylic cubes made by Stage One,illuminated internally with Pulsar LED light engines-effectively a pseudo large size'ChromaCube'if there were such a product!These are driven by a Pulsar Chromazone DMX LED power supply.
In total the LED fixtures require over 400 DMX channels of control.
The DMX control racks were all designed and built at dbn's facility in Manchester and some of the LED lighting was pre-installed in the set pieces at Stage One's HQ in York before being shipped out to Norway,where the build was completed and all the lighting commissioned and programmed.
Walker and the dbn crew worked on site with a team of seven set assemblers from Stage One led by account manager Simon Wood and project manager Rob Green,taking six days to complete the task.He comments,"It was a hugely enjoyable project to be involved in,and it is always great to work with Stage One on jobs which are unique,interesting and different."
