Hot tapping is a procedure where particular tools are used to cut into a present pipeline while it is still in the functioning mode. It may comprise of liquid or even gas and it will be under the pressure and so certainly it is arrived with a lot of probable hazards.
Basically the process is used to lessen the downtime and repair the expensive and damaging leakages. It also help in saving the money of the firm and also allowing the part of maintenance and repairing while the pipeline is still under the functioning mode.
Without the process of these tapping there would be several companies that would be otherwise told to just close their production and to work on the pipes first and then start their work. It takes a lot of time to pressure build and it certainly is not a very good option to just drain them out. You can very well understand the hindrance it may cause and even in this process lot of time and money are also wasted unnecessarily just because of this operation. After that you will have the work of bringing back the whole process online. This is the reason why the tapping is becoming more and popular by the day.
The equipment use dint he process of hot tapping or the line stopping is used in diverse situations and it can be anything from the present problem like the leaks or just by adding a branch line when you think that shutting down is just not an option. This process is also used when the main shut off line that has to be services is used by creating two taps that are in question.
This process requires a complex and specialized way where only a specialist knowledge and trained person can attempt to do it. Various tools are required to achieve the process of hot tapping.
The experts of the tapping procedure can handle the piping that is made up of several materials which includes steel, cast iron, copper, brass and even plastics. For this purpose a hole is cut where the valve of the hot tap is located.
The experts of this process can make with several materials which include steel, cast iron, copper, brass and even plastics. A hole is cut further from where the hot tap valve is located. This is then completed when the valve is further switched off. It sounds very easy but only a specialist can get it done with great care and precaution.
