GaN Systems Inc of Ottawa, Ontario, Canada, a fabless developer of gallium nitride (GaN)-based power switching semiconductors for power conversion and control applications, has launched its Half-Bridge Evaluation Board, which demonstrates the performance of its GaN enhancement-mode power semiconductors in real power circuits.
The fully functional GS66508T-EVBHB Eval Board can be configured into any half-bridge-based topology, including boost and buck modes. It comes with a Quick Start instruction guide and YouTube video links (www.youtube.com/user/GaNSystems) in order to have the installation up and running in minutes. The Eval Board can be used in synchronous boost or buck conversion, as well as pulsed switching to evaluate transistor waveforms. The kit has full documentation, including bill-of-materials component part numbers, PCB layout and thermal management, and gate drive circuit reference design, which is also useful for system engineers to use in their products.
Designed to provide electrical engineers with a complete working power stage, the evaluation board consists of two 650V, 30A GS66508T GaN FETs, half-bridge gate drivers, a gate drive power supply, and heat-sink. The GS66508T high-power transistors are based on GaN Systems' proprietary Island Technology and belong to its 650V family of high-density devices, which achieve efficient power conversion with fast switching speeds of >100V/nS and ultra-low thermal losses, the firm says.
GaN Systems claims to be the only company to have developed and productized a comprehensive portfolio of GaN power transistors with voltage ratings of 100V and 650V and current ratings from 7A to 250A. Its Island Technology die design, combined with the very low inductance and thermal efficiency of GaNPX packaging, provides the GaN FETs with a 45x improvement in switching and conduction performance over traditional silicon MOSFETs and IGBTs, the firm adds.
The 30A/55mΩ GS66508T GaN power transistors are top-side cooled and feature near-chip-scale thermally efficient GaNPX packaging. Power conversion efficiency of 98.7% at 1.5kW is shown in the product documentation and can be reproduced in the owner's lab.
The Eval Board provides footprints for output power inductors and capacitors to allow users to configure the board into desired boost or buck operational modes. Access to the transistor junction temperature is provided by both thermocouple pads and thermal camera imaging ports. Power input should be 9-12VDC, with an absolute maximum of 15V. On-board voltage regulators create +5V for the logic circuit and +6.5V for the gate driver. There are three operational modes: pulse test mode; buck/standard half-bridge mode and boost mode.
The GS66508T high-current half-bridge Evaluation Board is available now worldwide and can be sourced by searching the GS66508T-EVBHB part number to find a local authorised distributor.
