Available in five standard EIA case sizes (A through E), Tantamount TL3 devices are rated from 4V to 50V. They have a reliability at rated voltage of 0.50 per cent over 1,000hr at 85°C. CapacitanceThat property of a system of conductors and dielectrics which permits the storage of electricity when potential difference exists between the conductors. Its value is expressed as the ratio of a quantity of electricity to a potential difference. A capacitance value is always positive. range is 0.2μFUnit of capacitance. The basic unit of a measure of a capacitor. A capacitor charged to 1 volt with a charge of 1 coulombA coulomb is the unit of electric charge. It is named after Charles-Augustin de Coulomb.1 coulomb is the amount of electric charge transported by a current of 1 ampere in 1 second. It can also be defined in terms of capacitance and voltage, where one coulomb is defined as one farad of capacitance times one volt of electric potential difference. would have a capacitance of 1 farad. 1 microF = .000001 Farads. to 470μFUnit of capacitance. The basic unit of a measure of a capacitor. A capacitor charged to 1 volt with a charge of 1 coulombA coulomb is the unit of electric charge. It is named after Charles-Augustin de Coulomb.1 coulomb is the amount of electric charge transported by a current of 1 ampere in 1 second. It can also be defined in terms of capacitance and voltage, where one coulomb is defined as one farad of capacitance times one volt of electric potential difference. would have a capacitance of 1 farad. 1 microF = .000001 Farads. and capacitanceThat property of a system of conductors and dielectrics which permits the storage of electricity when potential difference exists between the conductors. Its value is expressed as the ratio of a quantity of electricity to a potential difference. A capacitance value is always positive. tolerance ±10 per cent or ±20 per cent depending on the model selected.
Case sizes B, C, D and E are 100 per cent surgeA transient variation in the current and/or potential at a point in the circuit. current tested. DC leakageLow DC leakage current.Low DC leakageLow DC leakage current. current. is 0.005CV. Low-ESRLow Equivalent Series Resistance versions are available as an option.
The devices are qualified to IPC/JEDEC Moisture Sensitivity Level 1 and are immune to popcorn crackling regardless of exposure to moisture.
Terminations are either 100 per cent matte tin (RoHS compliant) or standard tin/lead. Halogen-free parts are available on request.
TL3 series surface-mount moulded tantalum chip capacitors are fully compatible with high-volume automatic pick-and-place equipment and are packaged in 8mm, 12mm and 24mm plastic-embossed tape on 7in (178mm) or 13in (330mm) reels.
