Symptom: refrigerator evaporator leakage.
There are five ways to solve refrigerators evaporator leakage.
1.Pickling welding.First blocking evaporator leakage holes,then use sandpaper burnish and wipe around the hole.Dropping a few drops of rare hydrochloric acid around hole.Wait a moment,add a few drops of darker copper sulfate solution until the hole is surrounded by copper.Pull out the hole blocking material,using 100w power soldering iron to welding.
2.Adhesive trapping.Burnish and wipe around the evaporator hole,then coated with acetone solution for volatile.Use tc-311 type adhesive according to the 1:1 ratio and mix thoroughly applied to the evaporator hole.Cured for 24 hours at room temperature,carry out pressure test until not leak.
3.Tin and aluminum welding.Find some pieces of aluminum foil (Al: Sn = 3:7),then heated to above 600 ℃ to melt and cast a aluminum tin electrodes which diameter are 1.5-2 mm.Cleaning the surrounding of evaporator hole with a knife then use the 300w soldering iron to melt aluminum tin electrodes until the hole is filled by solder.
4.Friction welding with epoxy powder.Take an abandoned epoxy printed circuit boards,with ferric chloride to clean the surface corrosion.Then epoxy substrate processed into powder mixed with rosin and coated in the surrounding of evaporator hole.Use 300w electric soldering iron and tin friction around the hole can seal it completely.
5.Simple repair.Clean the evaporator hole and coated with self-curing denture powder and self-curing denture water which ratio are 5:3.
