Global PV Equipment Spending Is Now Projected to Fall

Global PV equipment spending (including c-Si ingot-to-module and thin-film panels) is now projected to fall by more than 45% in 2012, down from an historic peak of US$13.1 billion in 2011, according to Solarbuzz . As a result, PV equipment suppliers are being forced to redefine their product roadmaps to align with the projected upturn in spending after 2012. Almost half of PV equipment spending in 2011 has been stimulated by new entrants to the PV industry or from existing second- or third-tier manufacturers seeking to increase revenues simply by adding more capacity. The majority of this investment has turned out to be supplemental to the capacity required to meet short term industry demand. Consequently, revenues available to PV equipment suppliers have been temporarily inflated by US$6 billion during 2011. The scale of this over-investment will not only drive the magnitude of the revenue declines during 2012, but will also prolong the spending downturn period into 2013. According to Finlay Colville, senior analyst at Solarbuzz, "Aspirations of rapid market entry or market-share gains from lower tier cell manufacturers have been key factors behind the surplus in equipment spending during 2011. However, the second strong cycle of thin-film investments also peaked this year. This saw considerable funding being allocated to next-generation PV technologies." Having posted positive revenue growth between third-quarter 2009 and first-quarter 2011, PV equipment spending during both second-quarter and third-quarter 2011 has declined by single-digit percentage points, as the slowdown in new capacity expansion starts to impact equipment suppliers' revenues. While strong on-year growth of 21% during third-quarter 2011 will be highlighted during company reporting later in the quarter, the leading forward indicators show sharp declines in new order intake, resulting from PV manufacturers' concerns over capacity and demand levels forecast for 2012. Double-digit on-quarter revenue declines are now forecast between fourth-quarter 2011 and second-quarter 2012. The only PV equipment suppliers that will be shielded from rapid declines in revenues through 2012 are those with strong order backlogs aligned with polysilicon expansion phases in progress across the Asia Pacific region. This will actually drive on-year growth in revenues for a select group of companies meeting this upstream demand. Conversely, many other PV equipment suppliers will experience on-year revenue declines of 30-70%. Equipment suppliers that benefited most from the c-Si wafer, cell and module expansions of 2011 will be the hardest hit during 2012, as new expansion plans are pushed out or postponed. First tier manufacturers in Asia to dominate new spending upturn Upgrade and replacement equipment revenues in 2012 are unlikely to provide anything other than partial compensation for the significant declines in new capacity additions. Similarly, technology inflection points that may drive upside in tool revenues are likely to be spread across a wide range of competing high-efficiency schemes being investigated today. This gloomy outlook is further exacerbated by the continuous shakeout of uncompetitive PV cell manufacturers that will likely spread beyond Europe and North America during 2012. As a result, PV equipment suppliers-historically driven by incremental capacity to meet end-market growth-are now adjusting strategies based upon new product roadmaps to focus on the leading first tier manufacturers across Asia. Fundamental to the success of these roadmaps will be predicting the timelines and scale of the upturn in PV equipment spending at the process tool level. "The total addressable market for PV equipment today is heavily influenced by different investment motives and technology preferences, rather than capacity required under any rational supply-demand balance," added Colville. "Forecasting the spending cycles associated with these motives and technologies throughout the different stages of the value-chains will be essential for tool suppliers over the next few quarters." Source: www.digitimes.com