Cone crusher is a machine used for breaking big rocks into minor rocks,gravels or rock dusts.The stone crusher is widely used for all kinds of medium and fine crushing rocks with compressive strength under 350MPa in mining,cement industry,sand industry,metallurgy and other fields.It is especially suitable for materials with Mohs hardness under the range of 5-16,such as iron ore,non-ferrous metallic ore,granite,limestone,quartzite,sandstones,pebbles,etc.it is suitable for hard and mid-hard rocks and ores,such as iron ores,copper ores,limestone,quartz,granite,etc,so it also called rock crusher.Type of the crushing cavity is decided by the application of the ores.Type is for PYZ(secondary crush);middle type is for PYD(tertiary crush);short-head type is for primary and secondary crush.>Working Principle of the itWhen the stone breaker is working,the engine rotates around a fixed point driven by the belt wheel or the coupling.The transmission shaft and the conical part of the crusher swing under the force from the eccentric bushing,which makes the crushing wall close to the pierced mortar wall at intervals.Then,the ores will be impacted,squeezed and bent constantly in the crushing chamber.At last,the whole ore crushing process is finished.The perfect combination of high-performance crushing chamber and high crushing frequency improves the handling ability of it to a greater degree.
Functions and Features of the itThe spring safety system of the cone crusher can achieve insurance when foreign matters get into the crushing cavity or when the machine is overloaded for other reasons.The uncrushed materials will be discharged through the enlarged port to get out of the crushing cavity.Due to the effect of the safety system,the discharging port will be restored,which makes the cone crusher work normally again.Optimized cavity and higher output
Vipeak series hydraulic cone crusher is a novel crusher developed by engineers of vipeak company with reference to advantages of the most reliable and advanced cone crusher in the world.Through much theoretic analysis and practice examination,engineers in Vipeak designed this hydraulic cone crusher on the basis of advantages and disadvantages of different kinds of cone crusher.Its output is high and its energy consumption is low.Under the same diameters of mantle,the crushing stroke is longer and the crushing ration is bigger.Laminated crushing function can be fully realized with full load,which can ensure reliable composition and good shape of final sizes.
