Select the most important security lights, automotive lighting equipment not only owners of their own affairs, but also to the road environment for the exercise of the night, order, and even affect to other vehicles and pedestrians.
Xenon lamp is currently divided by a variety of models of color temperature: 4350 K, 6000 K, 7000K, 8000 K and 12000 K. Since 8000 K above the lights too Baitai Liang, penetration is weak, so in the United States, Europe, Japan and other countries prohibit the use of more than 8000 K lamp, afraid to pedestrians and other vehicles at risk. Busy car modification Services Limited recommends that customers install the xenon lamp 7000 K, because no matter the color temperature of light rain or fog in the environment has a strong penetrating power. At the same time the brightness of the light itself, can greatly ease the pilot felt the other party before the big bright lights shine through the glare. In addition, as compared xenon lamp light, high beam installed on the pedestrian, the car will be dangerous, it is recommended only when the best equipment installed light beam light. At the same time the best choice for consumers of formal, highly professional and experienced installation of automotive shop to get a guaranteed service.
How to determine the performance of xenon light bulb?
A) High flux of high flux can be simply understood as the actual light output volume. Manufacturers and the filler material through the filament flux increased processing will increase the brightness of lights, such as xenon and into more with the seismic design of filament.
B) The right to accept the human eye color temperature in the 2300K-7500K color temperature, while the actual use of the appropriate color temperature in the 3200K-5000K, so that the brightness of lights and penetration is very suitable for the lighting, when the color temperature at 3000K the following, the light yellow, and when reached 6000K, the sun will be able to show the general effect of the partial white.
C) Life should be noted that the life of cut-off lights before the downturn in the lamp light, or an average light efficiency is lower than the initial 75%, the bulb should be replaced.
Vertical on the above, the luminous flux, color temperature, the life of these three factors constitute the basis of the quality of the lights, the most important is the actual power of light to determine the actual effect of the lights. Technically, these factors are interrelated constraints, because if a manufacturer claims that their products which can do everything, to be suspect of its authenticity.
Hid xenon lamp in the installation should pay attention to what?
As hid will produce up to 23, 000 volts, the industry is not recommended that consumers install their own DIY, the best advertising on the specified installation location or distribution of listed manufacturers purchase and installation of hid. Actually install the system, can not be hid system connected to any power, the installation must pay attention to all the high-voltage warning, hid the system will produce a strong white light, do not look directly at source.
6000K and 8000K which penetrate more?
Usually people have a misunderstanding, the higher the color temperature, brightness higher. In fact, the unit is lumens brightness (m), 4300K is white with a little yellow; 5000K close to natural light; 6000K white point blue slightly; 8000K is bluish; 10000K is blue; 12, 000 out of cyan has been presented. As we know, higher the temperature, the lower the lumens of light, its fog, rain penetration worse. So 6000K 8000K penetration than stronger.
Source:
