Accurate humidity measurements play an important role in the process of stability chamber manufacturing. Osworld ensures that every stability chamber is tested for its proper functioning and care is taken in appropriate components selection. This has prompted the use of a very reliable humidity sensor manufactured by Humirel, France. The model HM1500LF has an accurate humidity measurement, within 10% RH to 95% RH. More importantly any excursion out of this range, notably lower than 10% or greater than 95% does not affect its reliability.
Based on the rugged HS110LF capacitive humidity sensor, HM1500LF is a dedicated humidity transducer designed for applications where a reliable and accurate measurement is needed. Direct interface with a microcontroller is made possible with the modules linear voltage output.
Some of its main features that add to its wide applicability in Osworld stability chambers are its small size, product is free from lead, Cr, Cd and Hg, it is not affected by water immersion and has full inter changeability. High reliability and long term stability with very low temperature dependence are in built. It is able to operate from 3 to 10 volts supply voltage.
The sensor has passed through qualification processes of Humirel including vibration, shock, storage, high temperature and humidity. It has an inbuilt protection against reverse polarity.
The sensor being an integral part of the Osworld stability chamber ensures the smooth functioning and reduces down time due to sensor malfunctioning. The usual fluctuations and issues related to excessive condensation within the chamber are avoided. In the event of water condensate being present on the inner chamber surface and then forming on sensor tip is by and large eliminated by use of a good quality sensor.
Accurate Temperature measurement in Osworld Stability Chamber
Temperature measurement is an important part of a process especially when there is a preset permissible deviation. The Osworld Stability Chamber, Autoclaves, BOD Incubators, Ovens, Bacteriological Incubators and Walk In stability chambers, which conforms to the stringent accuracy guideline set by ICH ensures that this is achieved by the use of highly reliable sensors manufactured by IGT. The science of thin film deposition and its related materials is the core of IGT products and services. Integrating of processes and materials to provide the final product is an expertise developed from years of designing and manufacturing quality sensors. Osworld has paved the way to new and better performance in multiple ways always with the customera€?s needs in mind. Our vast experience allows us to bring together different technologies in the selection of sensors. In conformance to this stringent requirement, Osworld has selected IST, a single source for all its temperature senor requirements. IST has the capability to the level that it is the only supplier in the world who provides and offers both, platinum and nickel sensors manufactured by this technology. You will find IST offers not only standard characteristics and resistance ratings, but also specially adapted sensor features.
