Universal Laser Systems has expanded its laser material processing systems with the addition of ULTRA Platform Series ULTRA platform-based laser systems are designed and ideally suited for precision laser cutting, laser ablation, and ...
Tags: Universal Laser Systems, lasers
Sandia National Laboratories in the USA has reported aluminium gallium nitride (AlGaN) laser structures emitting ~350nm ultraviolet radiation from optical and electrical pumping [Mary H. Crawford et al, Appl. Phys. Express, vol8, p112702, ...
Tags: AlGaN, ultraviolet lasers, LEDs
Annual production of laser-based manufacturing systems made by companies at German locations for the first time exceed the billion euro mark, according to data compiled by the German Engineering Federation (VDMA), Laser and Laser Systems ...
Tags: Laser Systems, solid-state lasers
In cooperation with international partners, Germany’s Forschungszentrum Jülich and the Paul Scherrer Institute (PSI) in Villigen, Switzerland have presented what is claimed to be the first semiconductor laser consisting solely of ...
Tags: Group-IV Lasers, clock signal, Electrical
FOBA Laser Marking + Engraving completes its M-Series of compact workstations for industrial laser material processing: With the M2000-R and M3000-R stations, FOBA introduces two high-throughput laser marking workstations with 2 position ...
Tags: Rotary Table, Laser Marking
University of California Santa Barbara (UCSB) and epiwafer foundry IQE Inc have developed 1.3μm-wavelength indium arsenide (InAs) quantum dot (QD) lasers grown on silicon (Si) with “record performance” [Alan Y. Liu et al, ...
Tags: Silicon, `Quantum Dot Lasers
The American Physical Society (APS), IEEE Photonics Society, Laser Institute of America (LIA), Optical Society of America (OSA), Optoelectronics Industry Development Association (OIDA) and SPIE have announced the launch of the National ...
Tags: Photonics, Electrical, Electronics
9 October 2012 IQE's III-V-on-Si laser materials enable next-gen hard disk drive technology Epiwafer foundry and substrate maker IQE plc of Cardiff,Wales,UK says that it has produced epitaxial wafers combining the optical properties of ...
Tags: IQE III-V-on-Si, laser material, next-gen hard disk drive technology
New CTO,Asian distributors,licensing agreement and first"LightEngine"sale make it a busy month for Berlin direct diode laser developer. Direct Photonics is focused on the development of ultra-high brightness direct-diode lasers.August ...
Tags: direct photonics, Dr Stefan Heinemann, CLT
Using Laser to cut materials is known as Laser Cutting and is usually used by Industries.How does this work?A computer is used to direct a high power laser for the Material to be cut.Once the laser is used on the material it usually melts ...
Tags: learning center, Laser cutting