AJ Distributors introduces the new J-Series trimmer capacitors from Voltronics. The J-Series is a proven performer delivering uncompromising stability in demanding RFID, medical and cellular technologies applications.
Extensive families of trimmer capacitors have been developed using air, glass, quartz, sapphire and PTFE dielectrics for both low and high-voltage applications. Models can be specified with total capacitanceThat property of a system of conductors and dielectrics which permits the storage of electricity when potential difference exists between the conductors. Its value is expressed as the ratio of a quantity of electricity to a potential difference. A capacitance value is always positive. as low as 1.2 pFUnit of capacitance. The basic unit of a measure of a capacitor. A capacitor charged to 1 volt with a charge of 1 coulombA coulomb is the unit of electric charge. It is named after Charles-Augustin de Coulomb.1 coulomb is the amount of electric charge transported by a current of 1 ampere in 1 second. It can also be defined in terms of capacitance and voltage, where one coulomb is defined as one farad of capacitance times one volt of electric potential difference. would have a capacitance of 1 farad. 1 microF = .000001 Farads. or as high as 250 pFUnit of capacitance. The basic unit of a measure of a capacitor. A capacitor charged to 1 volt with a charge of 1 coulombA coulomb is the unit of electric charge. It is named after Charles-Augustin de Coulomb.1 coulomb is the amount of electric charge transported by a current of 1 ampere in 1 second. It can also be defined in terms of capacitance and voltage, where one coulomb is defined as one farad of capacitance times one volt of electric potential difference. would have a capacitance of 1 farad. 1 microF = .000001 Farads., and are available in multi-turn as well as half-turn trimmers.
The J-Series is a range of high-performance, high Q, half-turn trimmer capacitors, now available throughout the world. Direct-cross replacements are provided for Sanshin part numbers and engineering kits for all J-Series components.
Most of the trimmers are internally sealed so that they can withstand immersion in flux and solvents without leaking. Non-magnetic trimmers mostly have been used and tuned at temperatures as low as 4°K. Trimmers can be customised for specific applications.
