1) Turn off the dome light first. 2) Remove the dome light cover using a small flat-head screw driver. 3) Make sure the stock bulb is not hot and take it off from the socket. 4) Install back the corresponding adapter came with the LED panel light (make sure to test see whether the LED lights up before proceed to next step). 5) Remove the double-sided tape on back of the LED panel and stick the LED panel light inside the dome light housing. 6) Put back the lamp cover and enjoy! Source: ijdmtoy.com
Source:
http://store.ijdmtoy.com/Articles.asp?ID=189
