ESRLow Equivalent Series Resistance characteristics are excellent, varying from 2.2 to 6.2 mOhms, depending on values. Operating temperature ranges from -40 to +75°C, with an exceptional life expectancy of 100,000 hours.
The MDCL Series film capacitors from Illinois Capacitor are available in a range of capacitanceThat property of a system of conductors and dielectrics which permits the storage of electricity when potential difference exists between the conductors. Its value is expressed as the ratio of a quantity of electricity to a potential difference. A capacitance value is always positive. values from 50 to 1,500 FUnit of capacitance. The basic unit of a measure of a capacitor. A capacitor charged to 1 volt with a charge of 1 coulombA coulomb is the unit of electric charge. It is named after Charles-Augustin de Coulomb.1 coulomb is the amount of electric charge transported by a current of 1 ampere in 1 second. It can also be defined in terms of capacitance and voltage, where one coulomb is defined as one farad of capacitance times one volt of electric potential difference. would have a capacitance of 1 farad. 1 microF = .000001 Farads. (Faradays) with high energy densityA figure of merit usually expressed in Joules per cubic inch for capacitorsA figure of merit usually expressed in Joules per cubic inch for capacitorsA figure of merit usually expressed in Joules per cubic inch for capacitors and voltage ratings up to 1,600 WVdc. Packaged in a tubular metal case, this capacitor is well suited for energy management applications that use dc link circuitry. Tinned brass terminals are available in two styles, with either male or female threads. This provides excellent electrical properties, with greater mechanical strength than wire leads or tabs
MDCL capacitors are recommended for all types of dc Link applications in products such as power inverters, UPS systems, solar heaters, induction heaters, green energy, motor controllers and other demanding applications. Low ESRLow Equivalent Series ResistanceLow Equivalent Series ResistanceLow Equivalent Series Resistance and high ripple currentThis applies to a DC application with a superimposed AC voltage. The ripple current rating is the maximum AC current the capacitor can handle. ratings, with self-inductance as low as 35nH, simplifies design for highest conversion efficiency.
ESRLow Equivalent Series Resistance characteristics are excellent, varying from 2.2 to 6.2 milliOhms, depending on values. Operating temperature ranges from -40 to +75°C, with an exceptional life expectancy of 100,000 hours. The impregnant is based on vegetable and contains no PCBs. Like other IC products, the parts are also fully RoHS compliant and 100% burn-in tested. Prices start at $35 each.
