Richardson RFPD, Inc. recently announces availability and full design support capabilities for a new line of high energy densityA figure of merit usually expressed in Joules per cubic inch for capacitorsA figure of merit usually expressed in Joules per cubic inch for capacitorsA figure of merit usually expressed in Joules per cubic inch for capacitors DC link capacitors from Cornell Dubilier.
The 948D Series uses a fusedCapacitors that incorporate an internal fuse in the design of the the capacitor to protect the circuit in failure mode., segmented metallization pattern, offering greater open circuit protection, increased reliability, and superior control of capacitanceThat property of a system of conductors and dielectrics which permits the storage of electricity when potential difference exists between the conductors. Its value is expressed as the ratio of a quantity of electricity to a potential difference. A capacitance value is always positive. loss than competitive types. The new capacitors are ideally-suited for DC link applications where high bus voltage, high capacitanceThat property of a system of conductors and dielectrics which permits the storage of electricity when potential difference exists between the conductors. Its value is expressed as the ratio of a quantity of electricity to a potential difference. A capacitance value is always positive., and high ripple currentThis applies to a DC application with a superimposed AC voltage. The ripple current rating is the maximum AC current the capacitor can handle. are required for smoothing and filtering, including larger inverter systems like wind and solar?energy, fuel cell, and traction applications.
