Mexico's Ministry of Energy issued on 22 June a mandatory technical regulation (NOM-030-ENER-2012) that establishes new minimum energy efficiency standards, test procedures, sampling, conformity assessment and labelling requirements for light-emitting diode light for general lighting purposes. The standard will require integrated omni-directional LED light in A, BT, P, PS and T bulb shapes, as well as LED light with an undeclared bulb shape, to comply with a minimum luminous efficiency of 50 to 55 lumens per watt (the ministry had initially proposed a minimum luminous efficiency of 50 to 60 lumens per watt). Integrated omni-directional LED light in BA, C, CA, F and G bulb shapes will have to comply with a minimum luminous efficiency of 40 lumens per watt. Directional LED light with AR11, BR, ER, MR, PAR and R bulb shapes will have to comply with a minimum luminous efficiency of 40 lumens per watt in the case of light with a diameter no larger than 6.35 centimetres and 45 lumens per watt in the case of light with a diameter higher than 6.35 cm.
The measured total luminous flux of directional and integrated omni-directional LED light may not be less than 90 percent of the nominal value marked on the product. LED light will also have to comply with a correlated colour temperature ranging from 2,700 to 6,500 as well as a minimum sustained luminous flux ranging from 83.2 percent for light with a nominal useful life of less than 15,000 hours to 95.8 percent for light with a nominal useful life of 50,000 hours or more. LED light will be required to meet various other provisions and required test procedures include a thermal shock resistance test and a switching test.
In addition, the standard will require LED light to be marked with such information as the name or brand of the producer or seller, certain electrical information (e.g., nominal input voltage, frequency, electric power, power factor and electrical current), and the date or code that identifies the period of manufacture. The packaging will have to include such information as the country of origin, the name and address of the domestic producer or importer, certain electrical specifications, and the bulb type and type of spatial distribution of light.
This regulation will enter into force on 21 August. Imported and domestically-produced LED light will have to comply with all applicable requirements by 20 October.
