Process control and yield management solutions provider KLA-Tencor Corp of Milpitas, CA, USA has introduced the WaferSight PWG patterned wafer geometry measurement system, the LMS IPRO6 reticle pattern placement metrology system, and the ...
Tags: KLA-Tencor, process control loops
The Bureau of Standards, Metrology & Inspection (BSMI) under Taiwan's Ministry of Economic Affairs has announced national quality standards for LED light bulbs: CNS 15436 regarding safety requirements, CNS 15630 regarding performance ...
Veeco Instruments Inc of Plainview, NY, USA has formed a strategic partnership with Rudolph Technologies Inc of Flanders, NJ, USA, which provides defect inspection, process control metrology, and data analysis systems and software. The ...
Tags: Electrical, Electronics
MicroSense LLC of Lowell, MA, USA, which supplies dimensional non-contact wafer metrology equipment for manufacturing silicon, compound semiconductor and power devices as well as magnetic metrology systems for MRAM (magnetoresistive ...
Tags: LED, LED Chip, LED component
Global process control and yield management product leader KLA-Tencor’s newly launched Taiwan Training Facility continues to reflect the market’s important role in the company’s business strategy. New Taiwan training ...
Tags: KLA-Tencor, market demands
Physik Instrumente (PI) GmbH & Co. KG Large clear aperture, high control dynamics, fast settling times and compact dimensions: PI launches a new product line of linear nanopositioning systems for a broad range of applications. The P-630 ...
On 18 March at the CS International Conference in Frankfurt, Germany, Emcore Corp of Albuquerque, NM, USA, which makes compound semiconductor-based components and subsystems for the fiber-optic and solar power markets, received the 2014 CS ...
Tags: Emcore Lake Shore, Electrical, Electronics
Altatech of Montbonnot, near Grenoble, France (a subsidiary of Soitec since January 2012) has received an order for its Orion LedMax wafer inspection and metrology system from Osram Opto Semiconductors GmbH of Regensburg, Germany. Osram ...
About Inmetro National Institute of Metrology, Quality and Technology (Inmetro) was created by law in December, 1973, to support t Brazilian enterprises, to increase their productivity and the quality of goods and services. ...
The main objective of Technological Information is to meet the needs and expectations of the clients and to contribute to the technological knowledge of Metrology and Quality, taking into consideration the development and competitiveness of ...
In-situ metrology system maker LayTec AG of Berlin, Germany notes that it is known that some properties of gallium nitride (GaN)-based light-emitting quantum wells (QW) can be improved by using a-plane III-nitrides. However, during ...
Tags: LayTec Metrology, AIN Interlayers
German automotive parts supplier ZF Friedrichshafen plans to establish a new testing center for transmissions at its R&D Center on Graf-von-Soden-Platz in Friedrichshafen, Germany in 2015 and 2016. The Group will merge development ...
Tags: German automotive, Auto Parts
The National Institute of Metrology, Standardization and Industrial Quality (INMETRO) is a Brazilian federal autarchy, linked to MDIC, the Ministry of Development, Industry and Foreign Commerce. In Brazil, certification bodies must be ...
Tags: INMETRO, certification
After two years of difficult and meticulous work examining, refurbishing, and testing the aging workhorse watt balance called NIST-3, PML researchers have used the instrument to obtain their latest measured value of the Planck constant ...
Tags: Consumer Electronics, Electronics
It is known that metal-organic vapor phase epitaxy (MOVPE) growth of AlGaAs on GaAs is limited by lattice mismatch at room temperature and not at growth temperature (A. Maassdorf et.al., J. Cryst. Growth 370 (2013) 150-153), notes in-situ ...
Tags: Laser Structures, Electronics