In the year between 2009 and 2011, Global blow molding machines import value increased year by year. The total import value of 2011 was 1.6 billion dollars, up 9.0% year on year, but its growth rate fell down compared to 2010. In 2011, the total export quantity of Chinese blow molding machines was 7,530 units, with a drop of 7.9% compared to 2010.
1. Chinese Blow Molding Machines (HS: 847730) Export Trend Analysis
●Chinese Blow Molding Machines Export Quantity
●Chinese Blow Molding Machines Export Value
●Chinese Blow Molding Machines Monthly Export Quantity
●Chinese Blow Molding Machines Monthly Average Export Unit Price (Ten Thousand USD/ Unit)
In 2011, the total export quantity of Chinese blow molding machines was 7,530 units, with a drop of 7.9% compared to 2010.
The total export value of Chinese blow molding machines grew continuously from 2009 to 2011, which has achieved 0.145 billion dollars in 2011, up 6.6% over 2010. The statistics shows that the export value of 2011 grew slower obviously than that of 2010 in the field of Chinese blow molding machines.
As can be seen from the line chart of 2009-2011 Chinese blow molding machines monthly export quantity, the total export quantity of the second half was slightly higher than that of the first half; besides, February hit the trough of industry exports in 2009 and 2011.
According to the line chart of 2009-2011 Chinese blow molding machines average export unit price, Chinese blow molding machines average export unit price fluctuated the most in 2010, and both the lowest and the highest average export unit price were in 2010, which was 1.06 ten thousand dollars per unit in February and 2.78 ten thousand dollars per unit in October.
From the changes in the price level of the whole year, the average export unit price of 2011 grew sharply, up 15.7% over 2010; meanwhile, the average export unit price of 2010 achieved a slightly increase of 2.4% compared to 2009.
2. Global Blow Molding Machines (HS: 847730) Import Trend Analysis
● Global Blow Molding Machines Import Value
In the year between 2009 and 2011, Global blow molding machines import value increased year by year. The total import value of 2011 was 1.6 billion dollars, up 9.0% year on year, but its growth rate fell down compared to 2010.
● Major Global Blow Molding Machines Importers
China is the largest importer of the blow molding machines, and the import value reached 268 million dollars in 2011, accounting for 16.77% of the total global import value. Followed by the USA, its import value was up to 156 million dollars in 2011, occupied 9.76% of the total global import value. Among the top 20 countries and regions mentioned above, in comparison with 2009, the three largest increased countries and regions in 2011 were Russian Federation (up 382.28%), Argentina (a rise of 303.15%) and Indonesia (an increased by 282.10%); meanwhile, the top three countries and regions with largest increase of import value in 2011 were as follows: China (a rise of 0.89 billon dollars), USA (an increased by 0.57 billon dollars) and Saudi Arabia (up 0.50 billon dollars).
● The Market Share of Major Global Blow Molding Machines Importers
Note: "↑"indicates that the proportion covered by import value in the total global import value grew continuously from 2009 to 2011. "↓" shows that the proportion covered by import value in the total global import value declined continuously from 2009 to 2011.
According to the table, the countries and regions which proportion covered by import value in the total global import value grew continuously from 2009 to 2011 were as follows: Indonesia, Mexico, Japan, Brazil, Thailand, Saudi Arabia, Russian Federation, South Korea, Argentina and South Africa. Among all the countries and regions mentioned above, Saudi Arabia grew the most sharply, which was up 3.11% in 2011 compared to 2009. Italy was the country which proportion covered by import value in the total global import value declined continuously, with a drop of 1.52% in 2011 in comparison with 2009.
3. 2012 Chinese Blow Molding Machines (HS: 847730) Exports
● Export Quantity & Value for Chinese Blow Molding Machines in the First Half of 2012
● Major Importers for Chinese Blow Molding Machines in the first half of 2012
● Major Cities/Provinces for Chinese Blow Molding Machines Export in the first half of 2012
In the first half of 2012, Chinese blow molding machines achieved an export quantity of 7,957 units in total, with a rise of 129.5% year on year; and the export value reached 0.72 billion dollars, up 5.6% year on year.
The major importers were Thailand, Vietnam, India, Indonesia, USA, Japan, Russian Federation, Malaysia, Brazil and Nigeria and so on. In the first half of 2012, Chinese blow molding machines export value for Thailand accounted for 6.31% of the total export value of Chinese blow molding machines.
The Major cities/provinces of export source of Chinese blow molding machines were as follows: Zhejiang, Guangdong, Jiangsu and Shanghai, in which Zhejiang’s cumulative export value of Chinese blow molding machines occupied 39.735% of the total export value of Chinese blow molding machines
4.2012 Major Global Blow Molding Machines (HS:847730) Importers
● Major Blow Molding Machines Exporters for USA from January to May in 2012.
Note: the statistics shows that USA imported none of the blow molding machines from Poland from January to May in 2012.
From Jan. to May in 2012, the import value for American blow molding machines was up to 0.59 billion dollars, with a drop of 20.93% year on year. Germany was the largest blow molding machines exporter for American, which owned 37.20% of the total import value. It's worth noting that the first five months in 2012, American import value of blow molding machines from Canada increased 327.06%, with a significantly growth; while American import value of blow molding machines from China decreased 61.24%.
● Major Blow Molding Machines Exporters for Mexico from January to May in 2012
From Jan. to May in 2012, Mexico imported blow molding machines about 0.63 billion dollars, up 168.24% year on year. France was the largest blow molding machines exporter for Mexico, which occupied 31.11% of the total import value. Followed by Germany, its percentage was 26.83%.
● Major Blow Molding Machines Exporters for Japan in the first half of 2012
Note: the statistics shows that Japan imported none of the blow molding machines from Turkey and Thailand in the first half of 2012.
In the first half of 2012, Japan imported blow molding machines about 0.33 billion dollars, a rise of 0.97% year on year. Germany was the largest blow molding machines exporter for Japan, which accounted for 46.28% of the total import value. Followed by India, its percentage was 27.36%. China was the fourth largest blow molding machines exporter for Japanese, and in the first half of 2012, Japan import value of blow molding machines from China grew up to 133.60%, with a sharply growth.
