Globe Valve According to The Channel Direction, Can Be Classified as Following

Globe valve according to the channel direction, can be classified as following: (1)Straight type globe valve (2) Angle type globe valve; in angle-type stop valve, the fluid simply by changing a direction, so that through this valve on the pressure drop than the conventional structure of small globe valve. (3) DC-type globe valve; in the DC-type or Y-shaped globe valve, the valve of the flow channel and mainstream Road into a slash, so that movement of the state extent of the damage is smaller than the conventional globe valve, so the pressure loss through the valve is also the corresponding smaller. (4) The plunger-type valve: This form of globe valve is a variant of conventional globe valve. In the valve, the valve flap and valve seats are usually based on the plunger principle of design. Polished into a flap valve stem is connected with the plunger, the plunger seal is on the two sets of flexible seals achieved. Two elastic rings separated by a ring, and through a valve cover nut the load exerted on the valve cover seals around the plunger pressure prison. Elastic ring can be replaced, you can use a variety of material, the valve is mainly used for "open" or "off", but with a special form of plunger or special rings can also be used to adjust flow. Butterfly Butterfly valve butterfly plate installed in the direction of the pipe. Source: Valvehardware