Trade Resources Industry Knowledge Straight-Through Structure Is The Most Common, But with The Greatest Resistance

Straight-Through Structure Is The Most Common, But with The Greatest Resistance

The structure of globe valve: The globe Valve body structure in the form of straight-through, DC and angle type. Straight-through structure is the most common, But with the greatest resistance. DC type has small fluid resistance, are used for containing solid particles or viscosity of the fluid. Angle type are usually by forging, used for small bore and high pressure of the globe valve... Globe Valve installation and maintenance should note the following: 1, The globe valves which are operated by handwheel or lever should installed in any position in the pipeline. 2, Handwheel, handle and drive mechanism does not allow for lifting. 3, The flow of media should be consistent with the direction of the arrow which shown on body. Source: Valvehardware

Source: http://www.valvehardware.com/news/20100704.html
Contribute Copyright Policy
The Structure and Installation of Globe Valve's Notes