How to Properly Clean Manufactured Stone Veneer?

Your local manufactured stone veneer company wants to make sure that you keep your custom stone looking great for years. Part of this is making sure that it’s well maintained and clean. As you know, manufactured stone veneer is much different than a natural stone, and needs to be cared for differently. It’s often more color-fast than natural stone, so it needs to be clean much less frequently. A good cleaning every two-three months should keep your manufactured stone looking wonderful! 5 Steps to Properly Cleaning Manufactured Stone Veneer: 1. Mix a cup or less of mild detergent with a few gallons of water. Never use harsh cleaners, the stone will fade, and some cleaners can even eat away at the stone. 2. Give the stone a pre-rinse to loosen dirt or dust. 3. Scrub the stone gently with a stiff bristle brush. Start with the dirtiest places, like where mud or dust is on the stone. Use a circular motion and clean your brush often. 4. Rinse your area thoroughly! This is so important. It’s crucial that you make sure all of the detergent is rinsed from the stone. 5. Finally, let it air dry! Now you’re stone should be looking great! Remember you don’t need to clean your manufactured stone often, if there is a little mud or muck just rinse with a hose or water. Or, if you have accent stone veneer inside your home, just wipe it down with a wet cloth. They also make special detergents for manufactured stone if you wanted to keep it on the safe side, but a mild dish detergent or even laundry detergent will do. If you don’t have manufactured stone in your home yet, but have been thinking about it, Native Custom Stone has a wonderful selection of manufactured stone veneer to choose from. They also have distributors all over Georgia, and across the globe! Source: nativecustomstone.com