How to Use and Protect The Plastic Crusher?

1.Plastic crusher and power unit to be securely installed. If you need long-term fixed plastic crusher operation, it should be fixed on the basis of the cement; if you need plastic crusher mobile operations unit to be installed in the crusher machine made with angle iron pedestal, and to ensure power machine (diesel engine or electric motor) and plastic crusher pulley groove at the same rotation plane. 2. Plastic crushing machine after you install fasteners fastening departments to check the situation, to give to tighten if loose. At the same time to check the suitability of the transmitter. 3. Plastic crusher machine start before turning the rotor by hand, check the tooth claw hammer and the rotor is flexible and reliable operation, broken interior whether collisions, the rotor rotation direction is consistent with the machine direction of the arrow, power machine and plastic crusher lubrication is good. 4. Plastic crusher machine should not replace the pulley, to prevent excessive speed resulted in crushing chamber produce an explosion, or the low speed impact mill's efficiency. 5. Plastic crushing machine must be maintained after starting their first idle 2 ~ 3min, no abnormal feeding after work. 6. Work and pay attention to the functioning of plastic crusher, first of all, feeding should be uniform, to prevent blocking of scrap room; second, not long overworked. If there is vibration, noise, bearing and body temperature is too high, the outside spray material phenomena, should immediately stop inspection, troubleshooting before they can continue to work. Source: hicow.com