BluGlass Ltd of Silverwater, Australia – which was spun off from the III-nitride department of Macquarie University in 2005 to develop a low-temperature process using remote plasma chemical vapor deposition (RPCVD) to grow materials ...
South Korea's Seoul National University has integrated two Advanced Vacuum plasma processing systems from equipment maker Plasma-Therm LLC of St Petersburg, FL, USA into its nanotechnology fabrication lab, which supports multiple users ...
University of California Santa Barbara (UCSB) in the USA has used limited-area epitaxy (LAE) on semi-polar gallium nitride (GaN) substrates to reduce misfit dislocation (MD) densities in multiple quantum well (MQW) green light-emitting ...
Yale University and University of Illinois Urbana in the USA have improved the efficiency of gallium arsenide phosphide (GaAsP) solar cells on silicon (Si) by reducing threading dislocation densities (TDDs) [Kevin Nay Yaung et al, Appl. ...
Tags: GaAsP solar cells, GaAsP, MBE, MOCVD
Epitaxial deposition and process equipment maker Veeco Instruments Inc of Plainview, NY, USA says that Epistar Corp of Hsinchu Science-based Industrial Park, Taiwan (the world's largest manufacturer of LED epiwafers and chips) has ordered ...
University of California Santa Barbara (UCSB) in the USA has developed a monolithic white light-emitting diode (LED) with blue light produced by electrical pumping, and green/'red' by optical pumping from the blue source [S. J. Kowsz et al, ...
For second-quarter 2016, epitaxial deposition and process equipment maker Veeco Instruments Inc of Plainview, NY, USA has reported revenue of $75.3m, down 8.6% on $78m last quarter and 42.7% on $131.4m a year ago, consistent with ...
Tags: Veeco, LED industry
Researchers at the University of Illinois at Urbana Champaign (UIUC) say that they have developed a new method for making brighter and more efficient green LEDs (R. Liu and C. Bayram, 'Maximizing cubic phase gallium nitride surface coverage ...
Tags: Green LEDs, MOCVD
South China University of Technology has used low-temperature barriers between indium gallium nitride (InGaN) multiple quantum wells (MQWs) to improve the light output power of light-emitting diodes (LEDs) by 23% to 63.83mW at 65mA [Zhiting ...
Tags: Low-Temperature Barriers, Quantum
Deposition equipment maker Aixtron SE of Herzogenrath, near Aachen, Germany says that it is working with five partners in the HEA2D project to investigate the production, qualities and applications of 2D nanomaterials. When integrated ...
Tags: 2D Nanomaterials, HEA2D Consortium
Deposition equipment maker Aixtron SE of Herzogenrath, near Aachen, Germany says that optoelectronics manufacturer Xiamen Changelight Co Ltd of Xiamen, Fujian Province, China has finalized qualification of its AIX R6 Close Coupled ...
Tags: Aixtron SE, Changelight, MOCVD
Researchers at University of California Santa Barbara (UCSB) and Rutgers University in the USA believe that charge polarization in III-nitride materials has not been adequately understood up to now [Cyrus E. Dreyer et al, Phys. Rev. X vol6, ...
Tags: semiconductors, Electronics
Rensselaer Polytechnic Institute and General Electric Global Research Center in the USA "experimentally demonstrate, for the first time, bi-directional 4H-silicon carbide planar gate, insulated-gate bipolar transistors (IGBTs) fabricated on ...
Tags: Bipolar Transistor
Aluminium gallium nitride (AlGaN) buffer layers with high aluminium content are necessary for optimal UV-C LED performance. But their band-edge lies below 300nm, so established 405nm in-situ reflectance is insensitive to the surface ...
In-situ metrology system maker LayTec AG of Berlin, Germany says that, following the request of customers and utilizing the modular concept of its new Gen3 in-situ platform, it has customized and expanded the related in-situ metrology ...