Most of the fully automatic swing doors can be found in shopping centers, hospitals, offices, and supermarkets. Homeowners usually use these doors in their garage. The door will automatically open and it is very applicable to accommodate heavy traffic of persons who goes in and out of the building. These doors are installed to accommodate people that will enter the establishment without using any force. Installation of an automatic swing doors will result to security and convenience of the people that are using it. There are two choices installing the doors and they are the fully automatic and the low energy swing doors.
? Maintaining the smooth operation of the automatic door will ensure that it works properly all the time. Automatic swing doors have sensors that will detect if there are persons within the range of the door so that it will automatically open or close. Always check the sensors to make sure it works properly. Check if there are obstacles that may obstruct the lens of the sensors. Some of the sensors have indicators if it is functioning well. The light will turn on and if it is not turning on check if there are debris that may obstruct the sensor for it to malfunction.
? Jammed or stiff doors must not be lowered or raised without checking the spring and rollers. These parts must be checked first to prevent further damage to the door. There are cases that there are dirt particles accumulated that must be thoroughly be cleaned from time to time.
? The moving parts such as roller tracks, bearings, hinges and springs, and shutter devices must be checked if there is no more lubricant that will make them work smoothly. Putting lubricants or oil to it monthly will prevent from any disruption of the swing door operation.
? Putting silicon spray on the roller tracks will make the swing door operate quietly and smoothly. It will have a slippery finish. The roller tracks should always be clean and it can be done by brushing or using a vacuum clean to collect all the debris. Once it is clean, putting petroleum lubricants can be applied and remove any excess lubricant. This will ensure that the roller tracks will be performing for longer period of time.
? Bolts and parts of the automatic doors must be checked to detect if these are already loose. This will make the door to stock in place and will not be able to move freely. Otherwise the door can be adjusted to be operated manually. It can be places steady to be open to avoid injuries.
The simple steps in maintaining the automatic swing doors will help you with your concerns.. Anticipating for the things that may help you prevent any accidents. If you cannot give outright solution to it, do not attempt to do so. Otherwise, it may cause big trouble and the damage may become severe. Instead, call technicians and experts that are knowledgeable in repairing it.
