The Art of Woodworking Has Gained Some Speed with The Use of Air Tools for Woodworking

The art of woodworking has gained some speed with the use of air tools for woodworking. Air tools are tools powered by compressed air instead of electrical-powered motors. The convenience of working with air tools for woodworking projects is not only the speed of working with powered tools. It is also convenience. Line up your woodworking air tools near your work surface at the start of your project because it is easy to disconnect one tool and attach another in a matter of seconds. Air Compressor The air compressor converts air into compressed air and stores it in the air compressor's two storage tanks. A hose is connected to the unit that channels the compressed air to the attached air tools. When the levers are pressed on the air tools, the compressed air is forced into the tools to power them to perform their specific functions. Air tools have universal fittings to connect an air tool hose. Nailers Pneumatic air-powered nailers cut woodworking project times in half with their ability to shoot and set several nails into the wood in a matter of seconds. Brad nailers, finishing nailers, angled finishing nailers and pinners make it faster and easier to complete many types of woodworking projects. Pneumatic Routers Intricate woodworking designs are either carved by hand with wood chisels and a hammer, or with powered routers. Powered by compressed air, a fixed-based pneumatic router--a model design with two side handles--can carve woodworking designs with its bit spinning at 18,000 RPMs. This type of router is often used to carve decorative edges around wood art pieces, to carve linear and curved designs, to notch out joinery grooves and to cut out holes in wood designs with smoother cuts than with a jigsaw. In-line routers, which are used in precision woodworking projects, can spin up to 23,000 RPMs from the supply of compressed air. Woodworkers use in-line routers when they need to have more handling control for intricate wood cuts. Air Sander An air sander sands woodworking pieces the same way an electrical sander would. Powered by the force of the compressed air, the sander spins with enough force to sand wood surfaces. The convenience of changing out an air tool attachment to connect the air sander means that your woodworking project may be completed easier and faster than connecting an electric sander. The LEX 2 150/3 Air Sander by Festool comes with a 3-in-1 hose that "supplies air, extracts dust and provides an exhaust all through one hose." Spray Gun Shaped like a garden hose sprayer with a dispensing paint cup connected to the top of its head, an air tool spray gun harnesses the compressed air force to spray even finishing coats of stain, polyurethane, primers and paint over woodworking projects. Having an air tool spray gun handy during a woodworking project lends the convenience of applying professional protective finishing coats to your project without the use of conventional painting power equipment. Source: ehow.com